Contact Us (02) 9388 1741
NRG Redundant Power Supply

NRG Redundant Power Supply

Half-rack 1U redundant power supply with dual hot-swappable 300W modules, powering up to five Matrox appliances with automatic failover and remote IP monitoring.

Modules: 2x hot-swap 300W Outputs: Up to 5 devices Form Factor: 1U half-rack Management: Web HTTPS, GPIO
Matrox Products
NRG Redundant Power Supply
NRG Redundant Power Supply
2x hot-swap 300W, Up to 5 devices, 1U half-rack
NRG PSU
Our Price: Request a Quote

The Matrox NRG is a half-rack 1U redundant power supply unit designed to provide shared, fault-tolerant power to up to five Matrox compact appliances from a single 1U rack position. Two hot-swappable 300W power modules operate in a 1+1 redundant configuration, with automatic failover to the remaining module if one module fails or is removed for replacement. The shared power approach consolidates power distribution for Monarch EDGE, ConvertIP, Extio N3, and other supported compact Matrox appliances into a single managed unit.

Remote power monitoring is provided via HTTPS web interface and GPIO connectivity, enabling operators to check module status and set alerts without physical access to the rack. Hot-swap capability allows a failed module to be replaced during live operation without powering down the connected appliances, maintaining service continuity in 24/7 broadcast and AV environments. The NRG is appropriate for rack installations where multiple compact Matrox appliances are deployed and power redundancy is a facility requirement.

Dual 300W Hot-Swap Modules

Two 300W power modules in 1+1 redundant configuration allow one module to be removed and replaced under load without interrupting power to connected Matrox appliances.

Powers Up to Five Appliances

A single NRG unit distributes power to up to five compatible compact Matrox appliances from one half-rack 1U position, consolidating power management and reducing required rack space.

HTTPS Web and GPIO Monitoring

Remote power status monitoring via HTTPS web interface and GPIO port allows operators to check module health and configure alerts without requiring physical rack access.

Automatic Failover on Module Loss

If a power module fails or is removed, the remaining module automatically assumes full load with no interruption to connected appliances, maintaining continuous power in live broadcast environments.

Technical Specifications

Full specifications for NRG Redundant PSU

  • Module Configuration
    2 × field-replaceable 300 W power supply modules
  • Hot-Swap
    Yes — replace individual module without interrupting 12 V DC outputs
  • Redundancy
    Automatic failover; if one module fails, second module carries full output load
  • Load Balancing
    Automatic load balancing between both modules for extended service life

  • Input Voltage
    100–240 V AC (auto-ranging)
  • Output Voltage
    12 V DC
  • DC Outputs
    5 × 4-pin DIN connectors: 1 × 12 V 3 A + 4 × 12 V 5 A
  • Maximum Output Power
    300 W
  • Connected Appliances
    Powers up to 5 Matrox appliances simultaneously

  • Form Factor
    1U, half-rack width; pre-installed on 1U rack tray
  • Rack Compatibility
    Standard 19-inch (EIA) rack

  • Network Management
    10/100BASE-T (RJ-45); manage via web browser or IP management software
  • GPIO
    GPIO port for error condition signaling to external monitoring systems
  • Status Indicators
    LED indicators for individual device and module status

  • Operating Temperature
    0–50 °C (32–122 °F)
  • Compatible Appliances
    ConvertIP, Extio N3, Maevex, QuadHead2Go, Monarch EDGE, ConductIP MRA, and any Matrox appliance with 12 V DC input

  • NRG-5-1DB
    1 × NRG PSU module pre-installed on 1U rack tray
  • NRG-5-2DB
    2 × NRG PSU modules pre-installed on 1U rack tray (full redundancy from delivery)
  • NRG-5-1DBY
    1 × NRG PSU module on 1U rack tray – TAA compliant variant

Documentation

Download product documentation and resources

Product Datasheet

NRG Redundant PSU Datasheet

Your browser doesn't support inline PDF preview. Download the datasheet instead.

Discover More

Similar Products

Explore other configurations and models that might suit your needs.

Secure Cable Solutions Recommended

Secure Cable Solutions

#SK-SLND-4

  • Compatible: QuadHead2Go Q155/Q185, Maevex 7112/6122/6152, Mura DVW, ConvertIP SRH/DSH/DRH
Adapters & Cables Recommended

Adapters & Cables

#DP to DVI Adapter

  • Type: DisplayPort to DVI passive adapter
  • Compatible: M-Series, LUMA Pro
Mounting Brackets Recommended

Mounting Brackets

#Angled Bracket Kit

  • Type: Angled rack/surface bracket
  • Compatible: TBD — fetch from page

Call a Specialist
Today!

Our team of experts is ready to help you find the perfect Matrox Video solution for your needs. Get personalised advice and competitive quotes.

Monday - Friday: 9:00 AM - 6:00 PM AEST
Sydney, Australia

Speak to an Expert

We're here to help with any questions

Call us now
(02) 9388 1741